Cleaning Bio and Deodorizing Filters
Washable foam based Bio filter (that is optional in many models) leads to reduction in allergens that thrive in polluted air. The filter is cleaned with a vacuum of by hand washing.
First open the front panel and tightly grab front side of the panel and lift up the panel to open. Then slightly push the panel up until the panel is hanged over the hooks of the unit.
Secondly remove the Bio filter and grab the handle and lift it up. Pull the Bio filter towards you and slide it down.
Slide the Bio filter ( which is usually blue in color) out to remove it from the slot.
Bio filter can be placed in any slots beneath the air filter.
Clean the Bio filter with a vacuum cleaner or soft brush. Then rinse it with running water and dry it in a ventilated area.
Install the Bio filter back in position. Close the front panel.
Clean the Bio filter every 3 month. The cleaning term may differ on usage and environmental conditions.
Deodorizing filter absorbs efficiently cigarette smoke, pet odors and other unpleasant smells. Deodorizing filter cleaning is simple, just remove old filter (like Air filter or Bio filter) and install a new one. New filter may be purchased from the retail store or odered from the dealer where you purchased the air conditioner.
Deodorizing filter is usually black in color, still the color may vary it depends on the manufacturer.
The replacement timing of the Deodorizing filter differs depending on the usage and environmental conditions.
Even if Deodorizing and Bio filters are installed in an inverted position, it will not affect its filtration system.